Skip to content

A number and a mount, for less than the blades with neither

DODAER #10 A5 ceramic

A #10 A5 snap-on blade leaving 1.5 mm (0.06 in), in 440C stainless and titanium-coated ceramic, at $15.99 — the only blade under $17 here that states a size and a mount.

DODAER size 10 ceramic A5 snap-on pet clipper blade

DODAER #10 A5 ceramic

A #10 A5 snap-on blade leaving 1.5 mm (0.06 in), in 440C stainless and titanium-coated ceramic, at $15.99 — the only blade under $17 here that states a size and a mount.

Size
#10
Cut length
1.5 mm (1/16 in)
Mount
A5 snap-on
Stated compatibility
Andis, most Oster A5, Wahl KM10 series
Comb blade
440C stainless steel
Cutter
Titanium-coated ceramic
Maker claim
More heat resistant than carbon steel, quieter in use
Cutting width
Not published
Package dimensions
25 × 25 × 25 mm (0.98 × 0.98 × 0.98 in) · 59 g
Amazon reference
B09VPFBDRW
EAN
0653948255232
  • States a size — #10, 1.5 mm (0.06 in) — which is the one standardized figure in this niche
  • Names the mount and three clipper families it fits, rather than "most clippers"
  • No cutting width published, so coverage per pass is unknown

Best for: An A5 clipper that needs a short, standard blade without paying professional prices

Check price on Amazon

Specifications

Size
#10
Cut length
1.5 mm (1/16 in)
Mount
A5 snap-on
Stated compatibility
Andis, most Oster A5, Wahl KM10 series
Comb blade
440C stainless steel
Cutter
Titanium-coated ceramic
Maker claim
More heat resistant than carbon steel, quieter in use
Cutting width
Not published
Package dimensions
25 × 25 × 25 mm (0.98 × 0.98 × 0.98 in) · 59 g
Amazon reference
B09VPFBDRW
EAN
0653948255232

What you are getting

A #10 blade, 1.5 mm (0.06 in) cut length, on an A5 snap-on mount — stated as compatible with Andis clippers, most Oster A5 and the Wahl KM10 series. $15.99.

The cheapest blade here, and the only cheap one that answers the shelf

Four blades on this shelf sit between $15.99 and $16.99. Three of them are three-packs of ceramic blades that publish no size number and no mount. This one publishes both, and costs a dollar less than any of them.

A number is not a marketing word. #10 means about 1.5 mm (0.06 in) left on the coat, and it means that whatever brand stamped the blade — that is the one genuinely standardized thing in this niche. “R-sharp” and “sharp but safe” are not numbers.

What it is made of, which it also states

Comb blade in 440C stainless steel; cutter in titanium-coated ceramic. The maker claims it resists heat better than carbon steel and runs quieter. Two named materials, one for each half of the blade — more than any other listing in this group gives.

The mount is the part that is not standard

A5 snap-on is the closest thing to a common fitting in pet clipping, and this blade names three families it fits: Andis, most Oster A5, Wahl KM10. That is the check to make before ordering, because a blade that does not seat is a blade that cannot be used at all.

The maker says so plainly on the page: “please make sure the applicable model before you buy”.

What is not published

No cutting width and no blade life. The only dimension given — 25 × 25 × 25 mm — is the package.

Availability

Read on the day this page was built: $16 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

Prices quoted in this text were read on 2026-10-06. The live price is at the top of the page.

The questions owners ask

Will it fit my clipper?

It fits the A5 snap-on mount, and names Andis, most Oster A5 and the Wahl KM10 series. A5 is the nearest thing to a common fitting on this shelf, which is why the Oster and Yaziyir blades already published here name it too. The maker still asks you to check your model first, and that is the right order: the number tells you what the blade cuts, the mount tells you whether it can be fitted at all.

What does #10 actually leave?

About 1.5 mm (0.06 in), and the listing says so — 1/16 inch. That is the useful property of blade numbering: a #10 leaves roughly the same length whichever brand stamped it. Three other blades in this group cost a dollar more and publish no number, so nothing on their pages says whether they leave 1.5 mm (0.06 in) or 9 mm (0.35 in).

Is a ceramic cutter better than steel?

The maker claims it runs cooler and quieter than carbon steel, and that it will not rust. What no listing on this shelf publishes is how long any blade stays sharp, so the comparison stops where the measurements stop. What is documented across the shelf is the habit that matters more: oil the blade every few minutes of use, because a blunt blade is the usual cause of a clipper that suddenly heats or pulls.

Products this fits

More clipper blades

  • Founouly three-pack of zirconia ceramic pet clipper replacement blades

    Founouly AP005 ceramic, 3 pack

    Three zirconia ceramic blades for the maker’s own 005 and 006 clippers, at $16.99, with no size number or cut length.

    Blades in the pack
    3
    Material
    Zirconia ceramic and stainless steel
    Stated compatibility
    The maker’s own clippers 005 and 006
    Size
    Not published
    Cut length
    Not published
    Reference
    AP005 — shared with the Grimgrow pack on this shelf
    Maker claim
    Never overheats, never rusts
    Stated limit
    Cut long coats shorter with scissors first, or the clipper jams
    Weight
    50 g (1.8 oz)
    Amazon reference
    B09XHX5GDF
    EAN
    5290618932083
    • Names the clippers it fits, which its identically referenced twin does not
    • Names the ceramic — zirconia — rather than saying only "ceramic"
    • No size number and no cut length, so it compares with nothing

    Best for: The maker’s own 005 or 006 clipper, when the blade stops biting

    Check price on Amazon
  • Grimgrow three-piece ceramic replacement pet clipper blade set

    Grimgrow AP005 ceramic, 3 pack

    Three ceramic replacement blades for an unnamed clipper, at $16.99 — no size, no cut length and no mount published.

    Blades in the pack
    3
    Material
    Ceramic, rounded wide teeth
    Size
    Not published
    Cut length
    Not published
    Mount
    Not published
    Reference
    AP005 — shared with the Founouly pack on this shelf
    Clipper included
    No, stated on the listing
    Stated use
    Knotted, thick, curly and coarse coats; feet, belly, face, legs, ears
    Amazon reference
    B09VBPD7V5
    EAN
    9341205618470
    • Three blades in the pack, so a blunt one gets replaced rather than worked on
    • States plainly that the clipper is not included
    • No size number, so the cut length is unknown

    Best for: Replacing the blade on the clipper this pack was sold with

    Check price on Amazon
  • Tileon TB006 three-pack of round-head ceramic pet clipper blades

    Tileon TB006 ceramic, 3 pack

    Three ceramic blades for the Tileon TB006 cordless grooming kit, claimed free of metal parts, with no size or cut length published.

    Blades in the pack
    3
    Material
    Ceramic, stated as carrying no metal components
    Head
    Round design
    Stated compatibility
    Tileon TB006 cordless grooming kit
    Size
    Not published
    Cut length
    Not published
    Cleaning
    Rinse clean; rust-proof in storage
    Clipper included
    No, stated on the listing
    Weight
    50 g (1.8 oz)
    Amazon reference
    B09VC2GRMZ
    EAN
    8069320794664
    • The reference on the pack matches the clipper named in the title
    • "No metal components" is the strongest of the three ceramic claims in this group
    • No size number and no cut length published

    Best for: A Tileon TB006 kit whose blade has stopped biting

    Check price on Amazon

Elsewhere in the cupboard

  • Andis 562014 set of seven color-coded plastic clipper guide combs

    Andis 562014 Premium Clip

    Seven plastic guide combs with internal metal clips covering 1/16 to 1 inch, for Andis UltraEdge and CeramicEdge blades over a #10.

    Combs in the set
    7, color-coded
    Sizes
    #7, #5, #4, #2, #1, A and E
    Lengths
    1/16, 1/8, 1/4, 3/8, 1/2, 3/4 and 1 in — 1.6 to 25.4 mm (0.06 to 1 in)
    Material
    Premium plastic with internal metal clips
    Blade underneath
    #10 detachable
    Stated compatibility
    Andis UltraEdge and CeramicEdge blades
    Tooth
    Deep teeth, spaced for longer hair
    Intended coats
    Thin and medium
    Weight
    Not published
    Amazon reference
    B0DSVKLWSP
    EAN
    0040102006692
    • The finest comb on this shelf at 1/16 inch, where every other set starts at 1/8
    • Metal clips inside the plastic, so the grip is steel even if the body is not
    • Plastic, on a shelf where seven of eight sets are metal — and the flex is what lets a comb slip

    Best for: An Andis UltraEdge or CeramicEdge blade, and a coat that is not dense

    Check price on Amazon
  • JOYZZE eight-piece metal guide comb set for five-in-one pet clipper blades

    JOYZZE JZCK-C1-0214

    An eight-piece metal comb set for 5-in-1 blades, weighing 454 g (16 oz), whose listing states no cutting length at all.

    Combs in the set
    8
    Material
    Metal
    Mount
    5-in-1 blade
    Stated compatibility
    JOYZZE C Series, and "other 5-in-1 clippers"
    Lengths
    Not published — "varying teeth widths"
    Weight
    454 g (16 oz)
    Color coding
    Not stated
    Amazon reference
    B0CB3YWW2V
    EAN
    0810109990214
    • Metal throughout, which is what keeps a comb from flexing on a dense coat
    • 454 g (16 oz) for eight combs, among the heaviest sets here
    • Not one cutting length is published, in any unit

    Best for: A JOYZZE C Series clipper, or another 5-in-1 whose own comb set costs more

    Check price on Amazon
  • shernbao set of eight color-coded stainless steel clipper guide combs

    shernbao ACK-001

    Eight color-coded stainless steel combs covering 1/8 to 1 inch on A5 detachable blades, explicitly not for 5-in-1 blades.

    Combs in the set
    8, color-coded
    Lengths
    1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8 and 1 in — 3.2 to 25.4 mm (0.13 to 1 in)
    Material
    Stainless steel
    Mount
    A5 detachable
    Stated compatibility
    A5 blades sizes 10, 15, 30; most Oster, Wahl and Andis detachable clippers
    Stated incompatibility
    5-in-1 blades
    Storage
    Box included
    Weight
    Not published
    Amazon reference
    B08LB1RKLV
    EAN
    0797550064537
    • Writes down the mount it does not fit, which almost no comb set does
    • Stainless steel for thirty cents less than the plastic Andis set on this shelf
    • No weight published

    Best for: An A5 clipper and a full range of lengths, at the lowest price for steel

    Check price on Amazon

All clipper blades