Skip to content

Generic, and honest about it

WWVVPET Replacement grinding heads, 2-pack

A two-pack of replacement grinding heads for WWVVPET, Too-zey and other grinders that share the same shape — the generic option, with a fit to verify.

WWVVPET replacement grinding heads two pack

WWVVPET Replacement grinding heads, 2-pack

A two-pack of replacement grinding heads for WWVVPET, Too-zey and other grinders that share the same shape — the generic option, with a fit to verify.

Contents
Two grinding heads
Compatible with
WWVVPET, Too-zey and other visually identical grinders
Amazon reference
B09FZ1L4C1 (identical on 6 markets)
EAN
6290935210993
  • Fits WWVVPET, Too-zey and other grinders that share the same head shape
  • Two in a pack
  • "Visually identical" is not a specification — the fit needs checking

Best for: Owners of one of the many unbranded grinders that share this shape.

Check price on Amazon

Specifications

Contents
Two grinding heads
Compatible with
WWVVPET, Too-zey and other visually identical grinders
Amazon reference
B09FZ1L4C1 (identical on 6 markets)
EAN
6290935210993

What it is

Two replacement grinding heads for WWVVPET, Too-zey and, in the manufacturer’s words, other grinders that look the same.

The honest version of “universal”

“Fits grinders that look identical” is at least a description of the truth. Nail grinders in this price bracket come from a small number of factories under many names, and the drums do interchange — usually. The measurement decides it, not the photograph.

What a bad fit costs

Vibration. An eccentric drum turns a tool an animal tolerated into one it fights, and the owner blames the animal. If a grinder has become unpleasant since the last head change, that is the first thing to check.

The alternative

A branded head with a published model list. On a cheap grinder it is a significant part of the tool’s price, and it removes the guesswork entirely.

The questions owners ask

How do I check the fit before buying?

Measure the diameter of the drum on your grinder and the depth of the spindle it sits on. WWVVPET sells these for grinders that look the same, which is a description rather than a guarantee — the measurement is what settles it.

What goes wrong with a generic head?

It runs slightly off-center. The tool then vibrates more than it did, and vibration — not noise — is the thing most animals object to. If your dog suddenly dislikes a grinder it used to tolerate, look at the head you last fitted.

Is it worth buying the branded head instead?

On a €20 grinder, the branded head is a noticeable share of the tool’s price. Where the brand publishes a compatibility list — as Casfuy does on this page — that certainty is usually worth the difference.

Products this fits

More grinder heads

  • Casfuy replacement grinding wheels for pet nail grinders

    Casfuy Replacement grinding wheels

    Replacement grinding wheels for Casfuy grinders, listed for the N10, N30, N50, N60 and N65 — and stated as incompatible with the N90.

    Compatible with
    Casfuy N10, N30, N50, N60, N65
    Not compatible with
    Casfuy N90 (stated by Casfuy)
    Type
    Replacement grinding wheel
    Amazon reference
    B07QH576J8 (identical on 6 markets)
    EAN
    0745103608110
    • The listing names the models it fits and the one it does not — rare, and worth a great deal
    • A spent drum is the usual reason a grinder "stopped working"
    • Casfuy models only, and not even all of them

    Best for: Casfuy owners whose grinder has started taking twice as long.

    ≈ $10
    Check price on Amazon
  • hiSpkNix pack of ten diamond-coated dog nail grinder replacement heads

    hiSpkNix H2-HAZ0064-10

    Ten diamond-coated replacement heads for $9.98. The same five bullets as the nqnqvl pack, a sequential reference, and no diameter or grit.

    Heads in the pack
    10
    Price per head
    $1.00
    Abrasive
    Diamond emery, coated
    Grit
    Not published
    Head diameter
    Not published
    Stated fitment
    "Most pet nail trimmers" — no model named
    Reference
    H2-HAZ0064-10
    Amazon reference
    B0FMHZ969D
    EAN
    0766717973944
    • A dollar a head, the second-cheapest on this shelf
    • Quick-change fit and a stated larger grinding edge than the previous version
    • No head diameter and no grit published

    Best for: A smaller pack of the same unbranded head, when twenty is more than needed

    Check price on Amazon
  • LuckyTail two-pack of hard and soft dog nail grinder replacement heads

    LUCKY TAIL Hard & Soft, 2 pack

    Two replacement heads, one coarse and one fine, for $19.95. Both are described on the page, and neither carries a grit number.

    Heads in the pack
    2
    Price per head
    $9.98
    Grades named
    Hard and soft
    Grit
    Not published
    Head diameter
    Not published
    Fitting
    Pull the old head out, push the new one in
    Cleaning
    Rinse under running water, dry before reuse
    Amazon reference
    B097R2462M
    EAN
    0860005936557
    • Both heads in the pack are described: coarse for length, fine for the edge
    • The page is complete — every grade it sells, it explains
    • $9.98 a head, the highest on this shelf and thirteen times the cheapest

    Best for: The two grades that actually do different jobs, from the grinder’s own maker

    Check price on Amazon

Elsewhere in the cupboard

  • Andis 72615 UltraEdge size 4FC chrome detachable clipper blade

    Andis 72615 UltraEdge 4FC

    An UltraEdge 4FC blade leaving 3/8 inch on a deep-tooth geometry, for body trims and blending rather than a close clip.

    Size
    4FC
    Cut length
    3/8 in (9.5 mm)
    Tooth
    Deep tooth, finish cut
    Steel
    Carbon-infused, specialized hardening
    Mount
    Andis detachable
    Stated compatibility
    Andis AG, AGC, BG, DBLC, FHC, MBG, SMC
    Intended work
    Body trims, blending, fuller coat styles
    Weight
    100 g (3.5 oz)
    Blade life
    Not published
    Amazon reference
    B0C6P9JVX4
    EAN
    0040102726156
    • Names seven clippers it fits, the most specific fitment statement in this group
    • States its cut length in a unit that compares — 3/8 inch, against the #10 blades’ 1.5 mm (0.06 in)
    • Twice the price of the #10 blades on this shelf

    Best for: A thick coat to be left long, on an Andis detachable clipper

    Check price on Amazon
  • DODAER size 10 ceramic A5 snap-on pet clipper blade

    DODAER #10 A5 ceramic

    A #10 A5 snap-on blade leaving 1.5 mm (0.06 in), in 440C stainless and titanium-coated ceramic, at $15.99 — the only blade under $17 here that states a size and a mount.

    Size
    #10
    Cut length
    1.5 mm (1/16 in)
    Mount
    A5 snap-on
    Stated compatibility
    Andis, most Oster A5, Wahl KM10 series
    Comb blade
    440C stainless steel
    Cutter
    Titanium-coated ceramic
    Maker claim
    More heat resistant than carbon steel, quieter in use
    Cutting width
    Not published
    Package dimensions
    25 × 25 × 25 mm (0.98 × 0.98 × 0.98 in) · 59 g
    Amazon reference
    B09VPFBDRW
    EAN
    0653948255232
    • States a size — #10, 1.5 mm (0.06 in) — which is the one standardized figure in this niche
    • Names the mount and three clipper families it fits, rather than "most clippers"
    • No cutting width published, so coverage per pass is unknown

    Best for: An A5 clipper that needs a short, standard blade without paying professional prices

    Check price on Amazon
  • Founouly three-pack of zirconia ceramic pet clipper replacement blades

    Founouly AP005 ceramic, 3 pack

    Three zirconia ceramic blades for the maker’s own 005 and 006 clippers, at $16.99, with no size number or cut length.

    Blades in the pack
    3
    Material
    Zirconia ceramic and stainless steel
    Stated compatibility
    The maker’s own clippers 005 and 006
    Size
    Not published
    Cut length
    Not published
    Reference
    AP005 — shared with the Grimgrow pack on this shelf
    Maker claim
    Never overheats, never rusts
    Stated limit
    Cut long coats shorter with scissors first, or the clipper jams
    Weight
    50 g (1.8 oz)
    Amazon reference
    B09XHX5GDF
    EAN
    5290618932083
    • Names the clippers it fits, which its identically referenced twin does not
    • Names the ceramic — zirconia — rather than saying only "ceramic"
    • No size number and no cut length, so it compares with nothing

    Best for: The maker’s own 005 or 006 clipper, when the blade stops biting

    Check price on Amazon

All grinder heads

Prices quoted in these summaries are dated readings. The live price is shown next to each product.