Skip to content

The other Catit pump — check which you need

Catit Flower fountain replacement pump

The original pump for the Catit Flower fountain range, with four suction cups underneath that keep it seated in the reservoir.

Catit Flower fountain replacement pump

Catit Flower fountain replacement pump

The original pump for the Catit Flower fountain range, with four suction cups underneath that keep it seated in the reservoir.

For
Catit Flower fountains with the triple filter
Mounting
Four suction cups on the base
Type
Original replacement part
Amazon reference
B079KKJ4LH (identical on 6 markets)
EAN
0022517500446
  • Restores a Flower fountain for a fraction of replacing it
  • Suction cups stop the pump migrating, which is a real cause of rattle
  • Flower range only — the PIXI takes a different pump

Best for: A Flower fountain that rattles or has stopped lifting water after a proper clean.

≈ $11
Check price on Amazon

Specifications

For
Catit Flower fountains with the triple filter
Mounting
Four suction cups on the base
Type
Original replacement part
Amazon reference
B079KKJ4LH (identical on 6 markets)
EAN
0022517500446

What it is

The original replacement pump for Catit’s Flower fountain range, with four suction cups on the underside.

Not the PIXI pump

Catit sells two pumps with similar names for two different fountains, and ordering the wrong one is the most common mistake in this corner of the catalog. Check the fountain, not the brand.

The suction cups are the quiet feature

A pump that slides around the reservoir buzzes against the plastic. Four cups hold it still — provided both they and the base are clean when you fit it, which is worth thirty seconds with a cloth.

The usual advice

Clean before you buy. A fountain that has stopped lifting water usually has a blocked impeller, not a dead motor.

The questions owners ask

PIXI pump or Flower pump?

They are not interchangeable, and both are sold by Catit under similar names. Match the pump to the fountain you own before ordering — this is the most common mistaken purchase in the whole fountain category.

What do the suction cups do?

Hold the pump against the base. A pump that shifts in the reservoir vibrates against the plastic, and that buzz is what people describe as a noisy fountain. Clean the cups and the base when refitting, or they will not hold.

How long should a fountain pump last?

Years, if it is never run dry and the impeller is cleaned periodically. Most fountain pumps that fail early were starved of water or left with hair wrapped round the rotor.

Products this fits

More fountain pumps & spares

  • Catit PIXI replacement fountain pump

    Catit PIXI replacement pump

    The original PIXI pump, with a sensor that switches it off when the water level drops — the failure that kills most fountain pumps.

    For
    Catit PIXI fountains only
    Protection
    Built-in dry-run sensor cuts the pump when the level is low
    Type
    Original replacement part
    Amazon reference
    B0B42JFB3L (identical on 6 markets)
    EAN
    0022517448335
    • Turns a dead fountain into a working one for a fraction of a new fountain
    • Dry-run protection addresses the exact way these pumps die
    • PIXI only — it will not fit the Flower range

    Best for: A PIXI that has gone quiet, or noisy, and has already been cleaned.

    ≈ $15
    Check price on Amazon
  • Baofum DR-DC160 submersible cat fountain replacement pump with LED

    Baofum DR-DC160 with LED

    An IP68-rated DR-DC160 replacement pump with LED for round, ceramic and stainless fountains from 2 L to 3 L, at $7.58.

    Motor reference
    DR-DC160
    Ingress rating
    IP68
    LED
    Yes
    Stated fitment
    81 oz / 2.4 L, 84 oz / 2.5 L, 101 oz / 3 L, 67 oz / 2 L
    Stated incompatibility
    Kastty, Catit, Wopet
    Noise claim
    Less than 40 dB
    Flow rate
    Not published
    Voltage
    Not published
    Weight
    132 g (4.7 oz)
    Amazon reference
    B0CKHS5PS3
    EAN
    0783798301428
    • The cheapest pump on this shelf, and the cheapest of three selling the same DR-DC160 motor
    • Carries the LED that the dearer KANCHOU version leaves out
    • No flow rate, which is the figure the shelf asks you to check

    Best for: A 2 to 3 liter round or ceramic fountain whose pump has stopped

    Check price on Amazon
  • KANCHOU DR-DC160 replacement cat fountain pump without LED light

    KANCHOU DR-DC160, no LED

    A DR-DC160 replacement pump without LED for 360° stainless and ceramic fountains, with a 30-day refund and 12-month warranty.

    Motor reference
    DR-DC160
    LED
    No
    Stated fitment
    360° stainless steel and ceramic fountains
    Stated incompatibility
    Kastty, Catit, Wopet
    Noise claim
    Less than 40 dB
    Warranty
    12 months, plus a 30-day refund
    Flow rate
    Not published
    Voltage
    Not published
    Weight
    125 g (4.4 oz)
    Amazon reference
    B097M6RP19
    EAN
    0791514464609
    • The only warranty on this shelf — twelve months, with a thirty-day refund
    • Names three incompatible brands in plain spelling
    • $12.99 for the same DR-DC160 motor Baofum sells at $7.58 with an LED

    Best for: A 360° stainless fountain, where a year of cover is worth five dollars

    Check price on Amazon

Elsewhere in the cupboard

  • Andis 72615 UltraEdge size 4FC chrome detachable clipper blade

    Andis 72615 UltraEdge 4FC

    An UltraEdge 4FC blade leaving 3/8 inch on a deep-tooth geometry, for body trims and blending rather than a close clip.

    Size
    4FC
    Cut length
    3/8 in (9.5 mm)
    Tooth
    Deep tooth, finish cut
    Steel
    Carbon-infused, specialized hardening
    Mount
    Andis detachable
    Stated compatibility
    Andis AG, AGC, BG, DBLC, FHC, MBG, SMC
    Intended work
    Body trims, blending, fuller coat styles
    Weight
    100 g (3.5 oz)
    Blade life
    Not published
    Amazon reference
    B0C6P9JVX4
    EAN
    0040102726156
    • Names seven clippers it fits, the most specific fitment statement in this group
    • States its cut length in a unit that compares — 3/8 inch, against the #10 blades’ 1.5 mm (0.06 in)
    • Twice the price of the #10 blades on this shelf

    Best for: A thick coat to be left long, on an Andis detachable clipper

    Check price on Amazon
  • DODAER size 10 ceramic A5 snap-on pet clipper blade

    DODAER #10 A5 ceramic

    A #10 A5 snap-on blade leaving 1.5 mm (0.06 in), in 440C stainless and titanium-coated ceramic, at $15.99 — the only blade under $17 here that states a size and a mount.

    Size
    #10
    Cut length
    1.5 mm (1/16 in)
    Mount
    A5 snap-on
    Stated compatibility
    Andis, most Oster A5, Wahl KM10 series
    Comb blade
    440C stainless steel
    Cutter
    Titanium-coated ceramic
    Maker claim
    More heat resistant than carbon steel, quieter in use
    Cutting width
    Not published
    Package dimensions
    25 × 25 × 25 mm (0.98 × 0.98 × 0.98 in) · 59 g
    Amazon reference
    B09VPFBDRW
    EAN
    0653948255232
    • States a size — #10, 1.5 mm (0.06 in) — which is the one standardized figure in this niche
    • Names the mount and three clipper families it fits, rather than "most clippers"
    • No cutting width published, so coverage per pass is unknown

    Best for: An A5 clipper that needs a short, standard blade without paying professional prices

    Check price on Amazon
  • Founouly three-pack of zirconia ceramic pet clipper replacement blades

    Founouly AP005 ceramic, 3 pack

    Three zirconia ceramic blades for the maker’s own 005 and 006 clippers, at $16.99, with no size number or cut length.

    Blades in the pack
    3
    Material
    Zirconia ceramic and stainless steel
    Stated compatibility
    The maker’s own clippers 005 and 006
    Size
    Not published
    Cut length
    Not published
    Reference
    AP005 — shared with the Grimgrow pack on this shelf
    Maker claim
    Never overheats, never rusts
    Stated limit
    Cut long coats shorter with scissors first, or the clipper jams
    Weight
    50 g (1.8 oz)
    Amazon reference
    B09XHX5GDF
    EAN
    5290618932083
    • Names the clippers it fits, which its identically referenced twin does not
    • Names the ceramic — zirconia — rather than saying only "ceramic"
    • No size number and no cut length, so it compares with nothing

    Best for: The maker’s own 005 or 006 clipper, when the blade stops biting

    Check price on Amazon

All fountain pumps & spares

Prices quoted in these summaries are dated readings. The live price is shown next to each product.